| 詳細內容： |
概述－－TSC系列可控硅動態無功功率補償器采用大功率可控硅組成的無觸點開關,對多級電容器組進行快速無過渡投切,克服了傳統無功功率補償器因采用機械觸點燒損,對電容沖擊大等缺點。對各種負荷均能起到良好的補償效果。 TSC-W型補償器采用的三相獨立控制技術解決了三相不平衡沖擊負荷補償?shù)募夹g(shù)難題,屬國內首創,填補了國內空白。 TSC動態無功功率補償器動態響應速度快 (小于20ms) ,節能降耗效果顯著,動態補償功率因數,具有降低損耗,穩定負載電壓,增加變壓器帶載能力等功能,是無功功率補償領域的更新?lián)Q代產品。1999年,該產品榮獲”國家級優秀新產品獎” ,2002年,在全國同行業十佳品牌調查中,榮獲:第一品牌”稱號 。
工作原理－－TSC系列可控硅動態無功功率補償器采用全智能控制,由控 制器,雙向可控硅,放電電阻, 電容器,電抗器,保護元件組成。 控制器實時跟蹤測量負荷的功率因數,無功電流,與預先設定的給定值進行比較,動態控制投切不同組數的電容器,以保證功率 因數始終滿足設定要求。整個測量執行過程在一個周波內完成(時間<20ms),控制器確保可控硅過零觸發。確保投切電容無沖擊,無涌流,無過渡過程。既動態快速跟蹤負荷變化,又克服了傳統 無功補償器對電容器所產生的危害和自身固有的缺陷。
技術特征:
◆可就地補償,也可集中補償;
◆實行三相或分相動態補償,A型適用于對稱負載,W型適用于不對稱負載或者沖擊性負載;
◆實時跟蹤,動態補償無功功率,實現無沖擊,無涌流,無過渡過程投切;
◆動態抑制諧波,運行安全可靠;
◆降低網損和變壓器損耗,增加變壓器帶載容量;
◆抑制電壓閃變;
◆在外部故障或停電時自動推出,送電后自動恢復運行;
◆微機控制,智能優化投切方式,實現無人值守,并具有串行通訊功能;
◆實現電流過零投切,最大限度延長電容器使用壽命;
◆在規定的動態響應時間內,多級補償一次到位,補償后功率因數大于0.90
技術參數:
◆符合標準: IEC831-1,GB12747-91
◆動態響應時間: <20ms
◆補償容量:(kvar): 90-810(單套容量),可以多套并用
◆投切級數: 2-11級
◆柜體防護等級: IP30
◆功率總損耗: <1.3W/kvar
◆容許誤差: 0~+10%
◆環境溫度: -30゜C——+50゜C
應用范圍:
◆負荷功率因數偏低,線路電壓降大,需要進行無功功率補償?shù)膱龊?
◆ 應用于負載功率因數變化范圍大,變化速度快的場合
◆ 對電壓波動和動態補償有較高要求的用電場合
◆ 廣泛應用于電力,機械制造,汽車。冶金,造船,港運。鐵路。煤礦,化工,油田等行業
TSC-Series SCR Reactive Power Compensator
OUTLINE：
TSC-series reactive power compensator uses the high-power controllable silicon static switch to actuate the multi-capacitor banks swiftly and in-transitionally conquers the traditional reactive power compensators' defects in mechanical contact's burnout and surge current to the capacitors, compensates effectively and simultaneously. Adopting three-phase independent controlling technique TSC-W series compensator solves the compensating problems in three-phase unbalanced shock fluctuant load. This compensator is initiative, filling the gap in science and technology in China. TSC-reactive power compensator has high respond speed(less than 20ms) with remarkable saving energy and high power factor. Reducing the losses and stabling the load voltage can enlarge the load range. TSC dynamic reactive power compensator is the renewal and renovation equipment in the field of reactive power compensator. In 1999, our TSC product was awarded "The National Fresh Prominent Product", in 2002, was awarded "A-one brand" in the top-10 nationwide surveys.
WORKING PRINCIPLE：
TSC-series dynamic reactive power compensator adopts the intelligent controlling technique, which consists of controller, Bi-directional thyristor, leak resistors, capacitors, reactors and protective elements. Controller is used to do follow-up measurement the power factor and reactive currents of the loads in real-time. Compare with the pre-established amount and dynamically control the number of imputing capacitor banks; ensure to coordinate the power factors with the pre-established power factor. The measuring process can be completed in one period of time (less than 20ms), and the controller ensure the thyristor trigger though zero, and ensure the capacitors without shock, fluctuating currents and transitional process. TSC not only tracks the changing loads rapidly and dynamically, but prevent the traditional reactive power compensator from its intrinsic defects and the damage of the capacitance.
TECHNIQUE CHARACTERS：
** Compensate both on the spot or in the center
** Dynamically compensate by three-phase or separating phase, series A is fit for the symmetrical loads, series W is fit for the asymmetrical loads or concussion loads
** Track simultaneously, dynamically compensate reactive power, acting without shock, fluctuating currents and transitional process
** Restrain harmonic currents dynamically, operate safely and reliably
** Reduce the loss in the power netting and the transformers, enlarge the load range of transformers
** Retrain the voltage fluctuation
** Automatically quit at the time of outer breakdown or power off, and automatically recover after power on
** Control by micro-computer, move in intelligent optimum way, non- supervise, series-parallel communicate
** Actuate through zero, prolong the maximum life of the capacitor
** Multi-compensate act simultaneously in the regulated dynamically responding time, and the power factor is above 0.9 after compensating
TECHNIQUE PARAMETERS：
** Standards: IEC831-1,GB12747-91
** Dynamic responding time: <20ms
** Compensating capacity: (kvar)90--810(capacity per set),apply to series-connect sets
** Switching level:2-11
** Cupboard protective level: IP30
** Total loss in power: <1.3w/kvar
** Admitted error:0--+10%
** Environmental temperature:-30 ゜ C --+50 ゜ C
APPLICATION RANGE:
** The situation with low load power factor, high line voltage drop and needing reactive power compensating
** The situation with great changing load power range and quick changing speed of the load power factor
**The situation with high power demand for voltage fluctuating and dynamic compensating
** Widely apply to the field of power, automobile, metallurgy, shipbuilding, shipment, railway, coal mine, chemistry and oil field
ORDERING NOTICE:
◆Please give clear indication of product's standards and models(including specifically design)
◆Please give clear indication of load harmonic current and related data
◆Please give clear indication of ordered sets number
◆Please give clear indication of fixing location and primary system diagram and ichnography
◆Please give clear indication of the size and colour of the screen and cupboard
◆Please give clear indication of other specific orders
◆Please give clear indication of address and telephone
|
|
中國電子商務服務聯盟成員單位 瓊ICP備